Channel Lifter 600 (DC) ─ for Curved-Surface Loads

Channel Lifter  600 (DC) ─ for Curved-Surface Loads
Channel Lifter  600 (DC) ─ for Curved-Surface Loads Channel Lifter  600 (DC) ─ for Curved-Surface Loads Channel Lifter  600 (DC) ─ for Curved-Surface Loads
Model: P11004DC2
Instructions: Download  |   Maintenance: Download  |   Specifications: Download
Price: Sold through Authorized Dealers

This lifter's Dual Vacuum System (DVS) features two completely independent vacuum circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. DVS is designed to reduce the risk of falling loads, which could otherwise result from material breakage or accidents that compromise one area of the vacuum system. In addition, DVS features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Originally designed to comply with CE Standard EN 13155, this system provides additional security in any setting.

Standard Pad Spread:
49" x 10" [1245 x 254 mm]

Number / Type of Vacuum Pads:
4 / 10" [25 cm] diameter concave pads (for curved materials)

Maximum Load Capacity:
600 lbs [270 kg]

Weight of Lifter:
95 lbs [44 kg]

Standard Operating Power:
12 volts DC, 4.5 amps

Load Movement:
Manual rotation, 180° edgewise, with locking in three positions.
Manual tilt, 90° between upright and flat, with automatic latching in upright position
(Lifters can be tilted ONLY when lift bar is locked in center position, as shown above.)

Standard Features:
Adjustable-position lift spool
Dual vacuum system
High-flow vacuum pump
On-board battery and charger
Battery energy gaugeLow vacuum warning buzzer
Power loss warning buzzer
Green lift light
Vacuum gauges
Vacuum line filters
Vacuum reserve tanks
Blow-off for quick release

Available Options:
Movable control pendant (59040)
Remote control system (94117BM)
Shipping case (53005)
Alternative pad compounds, including ones for low-marking, temperature resistant and coated surface applications (special order)
Counterbalance Lifter (CB2DCS)

Channel Lifters are comprised of one or more Pad Channels, for gripping loads, plus interchangeable Lift Frames, for rotating and tilting materials (Available Components). These vacuum lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.

Design Standards:
ASME B30.20 (BTH-1 Design Category "B", Service Class "0")
AS 4991

Based on product information at time of publication.

Load Capacity 600 lbs [270 kg]
Per-Pad Capacity 150 lbs [68 kg]
Pad Model G0750
DC Power Standard
DC Volts 12 VDC
DC Amps 4.5
Charger Voltage 100/120/240
Charger Hertz 50/60
Charger Phase 1
Weight (DC) 95 lbs [44 kg]
Manipulation Continuous
Tilt 90°
Tilt Power Manual
Rotation 90°Left - 90°Right
Rotation Power Manual
Max Pad Spread (L) 49"
Min Pad Spread (L) 49"
Max Pad Spread (W) 10"
Min Pad Spread (W) 10"
Max Height 62.75"
Min Ambient Temp 32° F
Min Load Temp 32° F
Max Ambient Temp 100° F
Max Load Temp 100° F

Based on product information at time of publication.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Tags: P11004DC2

* For pricing and delivery information about this product, CONTACT US for your nearest authorized dealers.

* Environmental conditions can affect product performance and longevity; consult the product instructions or contact a
    Technical Sales Representative for more information.