Read and understand the equipment manual before use. Review the
adjustable telescoping pad shafts procedure prior to attaching the load.
Ensure all pad shutoff valves are in the OFF position, then press Attach. Examples in the video indicate when pad valves are turned to the ON position to create vacuum between the pads and the load.
Press the pad adjustment button and move the shaft until the pad makes contact with the load. Turn the pad valve to the ON
position to create vacuum and begin sealing. Continue pressing the pad
adjustment button until the pad is fully seated against the load. Use
the pad adjustment knob for fine adjustments until the pad adjustment
button releases.
Once all pads are attached, verify that the green lift light is
illuminated, indicating sufficient vacuum for lifting. A strobe light
indicates a vacuum leak.
